Axle identification

Ive not long picked up a new series with a TDI conversion. I'm trying to order some service bits up but having trouble identifying what axles have been put in. If anyone could shed some light or point me to where I should be looking? Cheers

Front diff Stamp https://www.flickr.com/photos/197675928@N03/
Rear diff stamp https://www.flickr.com/photos/197675928@N03/
rear diff https://www.flickr.com/photos/197675928@N03/

rear

rear

front

Forby4_ said:

Ive not long picked up a new series with a TDI conversion. I'm trying to order some service bits up but having trouble identifying what axles have been put in. If anyone could shed some light or point me to where I should be looking? Cheers

Front diff Stamp
Rear diff stamp
rear diff

rear

rear

front

Click to expand...

HRC1124 is @ disco 2 diff 24 spline.

Dont see the @xle code listed for @ny defenders..
Axle Codes - Find Land Rover parts at LR Workshop

Series. On coils. Sure. Designa chassis?

Wildefalcon said:

Designa chassis?

Click to expand...

Thats the one

Okay, cool. Never understood the legalities of that one.

If it's a real bitsa then it's worth remembering that the serial number only applies to the bit it's stamped on, and as far as I remember the tube part is the same for all coil-sprungs with the exception of the width of the radius arm brackets. The major differences all start with the swivel housings - Raiko bush/taper roller/ABS and caliper type. Diffs all have the same bolt pattern.

After having just changed both my axle cases I can confirm the only thing the axle case number confirms is the actual axle case!