- Posts
- 2,101
- Location
- Mull of Kintyre
1996 4,6 V8
Silly question but the numbers on the eas housing, which bag do which pipes go to?
Silly question but the numbers on the eas housing, which bag do which pipes go to?
P38A Another EAS question
- Thread starter oakey
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 58,170
- Location
- Preston Lancs.
Grrrrrr
Technician, Bodgit & Scarper Ltd
- Posts
- 19,848
- Location
- Buckinghamshire, UK. ('95 DT)
If you imagine the valve block face up, the pipes go to the same corner as the layout.
- Posts
- 2,101
- Location
- Mull of Kintyre
Thank you Wammers and Grrrrr
That write up is superb full marks to Paul
That write up is superb full marks to Paul
- Posts
- 58,170
- Location
- Preston Lancs.
I was going at one time to do a similar thing, but finding that saved me a lot of work. It is very good and should be looked at by anyone considering working on the valve block. If anyone loses the link it is listed in my EAS post in the Tech archive. Good luck.
- Posts
- 2,101
- Location
- Mull of Kintyre
Thanks Wammers
biketeacherdave
Well-Known Member
- Posts
- 4,971
- Location
- south east london
Iv been reading that guide severely times over before I refurb my new to me valve block
- Posts
- 2,101
- Location
- Mull of Kintyre
About to re do my pump as I was able to hold air back with my thumb
- Posts
- 2,101
- Location
- Mull of Kintyre
Okay looking at Island web site
They sell a solenoid repair kit, a solenoid diaphragm repair kit and an O ring repair kit.
Is the normal overhaul of the valve block only the O rings or should I get solenoid repair kit too?
They sell a solenoid repair kit, a solenoid diaphragm repair kit and an O ring repair kit.
Is the normal overhaul of the valve block only the O rings or should I get solenoid repair kit too?
- Posts
- 58,170
- Location
- Preston Lancs.
Just the O'rings and diaphragm.
- Posts
- 2,101
- Location
- Mull of Kintyre
Thank you
Similar threads
