another EAS problem

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

discomalc

New Member
Posts
304
Location
Hastings east Sussex
Mornin all,:welcome2:
Heres another EAS problem that i cant see has been covered before.
Changed my front airbags yesterday for some arnott genII (still to do the rears, it started p***** down) all worked fine and dandy or so it seemed.
Went out today and i cant select low (motorway) ride height any more.
It all worked fine before but now when i press down from standard height it goes straight to access height, dosent even light the low height indicator at all. Have i disturbed something when changing the bags?
Any ideas or help appreciated, by the way its a 2001 4.6 vouge if that helps at all.
While im here heres another one. been getting ABS fault and traction failure on the message centre recently, so thought while im down there illl look at the sensors, should they pull out quite easily?? i see in rave that you should "use a suitable lever" but i was tugging on them pretty hard and they didnt want to budge. any hints on getting these out??
cheers for any help
 
ABS sensors SHOULD come out fairly easily IF they have been assembled with silicon grease as recommended. Try twisting them to start them moving, then twist and pull they should be no problem. Don't tug on the wires.
 
Mornin all,:welcome2:
Heres another EAS problem that i cant see has been covered before.
Changed my front airbags yesterday for some arnott genII (still to do the rears, it started p***** down) all worked fine and dandy or so it seemed.
Went out today and i cant select low (motorway) ride height any more.
It all worked fine before but now when i press down from standard height it goes straight to access height, dosent even light the low height indicator at all. Have i disturbed something when changing the bags?
Any ideas or help appreciated, by the way its a 2001 4.6 vouge if that helps at all.
While im here heres another one. been getting ABS fault and traction failure on the message centre recently, so thought while im down there illl look at the sensors, should they pull out quite easily?? i see in rave that you should "use a suitable lever" but i was tugging on them pretty hard and they didnt want to budge. any hints on getting these out??
cheers for any help
motorway height can be selected if you press the suspension lock button first then you can select any of the heights:)
 
Back
Top