90 engine squealing 2.5N/A

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
cant see your video at work

have you done the timing belt recently ?

my squeeling recently was down to me changing the crank seal on the timing case cover....and not gluing it in so the seal was spinning in the crank case.

it did my nut in... so i stripped open the crank case again glued it in .... squeel gone.
 
I found it. It was the alternator unit's ventilation thingy, i suppose fan is a good word for it. Anyway, it came loose, so i tightened it up again, solved the issue. Thanks for your help.
 
Recently had the same problem,the fan should engage with the same key as the pulley,on my replacement alternator the spacer was not deep enough for this to happen so was replaced with the one from the old alt. I had at first just tightened it up but it soon came free again so keep an eye on it.
 
You must log in or register to reply here.

Similar threads

H
Noise when pulling off with heavy load
Replies
3
Views
784
Anaconda
A
S
Whistle from air vent
Replies
4
Views
730
simonjamesd
S
L
Squealing noise
Replies
9
Views
2K
miktdish
miktdish
B
Rear rattle/ clunking
Replies
4
Views
1K
Anaconda
A
P
Problems starting and temp gauge issue after work on instrument wiring
2 3
Replies
43
Views
4K
patrickr90
P
Back
Top