ard-tullaich
Member
- Posts
- 39
My disco is going to get its 170,000 service next weekend.
And I was thinking about replacing the big end bearings on the con rods while i'm at it .
Do I replace them with standard bearings or +10 Thou (0.25mm). The crankshaft has not been reground its just as is from factory.
Also recommendations for which bearing manufacturer or supplier would be a help.
And I was thinking about replacing the big end bearings on the con rods while i'm at it .
Do I replace them with standard bearings or +10 Thou (0.25mm). The crankshaft has not been reground its just as is from factory.
Also recommendations for which bearing manufacturer or supplier would be a help.