Disco 1 300 injection pump leak...

Marmaduke

Well-Known Member

Posts

9,773

Location

Near the land of 'Me Duck'

• Feb 12, 2018

• #1

Just swapped my injection pump over that was leaking from the throttle spindle only to find the replacement one has started to leak from the front shaft into the timing case Which one is the easiest fix?

Thanks in advance

 

neilly

Well-Known Member

Posts

20,000

Location

Oxfordshireness

• Feb 12, 2018

• #2

I did the throttle spindle bush and o rings, was pretty easy, not had to do the other leak so do not know about that.

Kit cost about £14. there is a how to linked in here
https://www.landyzone.co.uk/land-ro...p-leak-from-the-throttle-spring-pivot.324129/

Cheers

 

neilly

Well-Known Member

Posts

20,000

Location

Oxfordshireness

• Feb 12, 2018

• #3

One thing to add, not sure if it made any difference, except it does not have the cold start fitted.

Mine is actually a 200tdi pump on a 300tdi engine.

Cheers

 

Marmaduke

Well-Known Member

Posts

9,773

Location

Near the land of 'Me Duck'

• Feb 12, 2018

• #4

neilly said:

I did the throttle spindle bush and o rings, was pretty easy, not had to do the other leak so do not know about that.

Kit cost about £14. there is a how to linked in here
https://www.landyzone.co.uk/land-ro...p-leak-from-the-throttle-spring-pivot.324129/

Cheers

Click to expand...

Cheers pal, I'll get a kit ordered from ebay

 

Kev12

Well-Known Member

Full Member

Posts

1,799

Location

Cornwall

• Feb 14, 2018

• #5

I did one of these kits (not on a landy but same pump) and neglected to buy the full kit. I only bought the bush and not the spindle which was a mistake because both parts were equally worn.

I got my parts from http://www.diydieselshop.com/