Series 3 200 tdi - series radiator, bottom hose
- Thread starter WoodyO
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
steve2286w
Well-Known Member
- Posts
- 4,945
- Location
- monkeyangerland
I dont think i bought any extra hoses, this would have been made up with what was on the 2286 and the tdi , cant remember if i needed to cut one
steve2286w
Well-Known Member
- Posts
- 4,945
- Location
- monkeyangerland
In situ
Wildefalcon
Well-Known Member
- Posts
- 1,829
This is mine, guys at work swapped a cat engine for another used one, this hose was spare so I may have purloined it and this is where it has lived for the last 18 years.
This is a 200 with the early narrow style radiator, I cannot comment on the later rads as obviously they are gay!
Crap camera hence crap picture.
This is a 200 with the early narrow style radiator, I cannot comment on the later rads as obviously they are gay!
Crap camera hence crap picture.
steve2286w
Well-Known Member
- Posts
- 4,945
- Location
- monkeyangerland
That’s clever does it ever cut in, where did you buy it from , just wired in a manual switch for mine
Wildefalcon
Well-Known Member
- Posts
- 1,829
I've it set a bit too low, as I'm planning on increasing the boost on the turbo quite a bit in the next round of upgrades. It came on last summer in traffic. I was towing a trailer with a Bridgeport onboard at the time. The fan only ran for a minute or two.
I bought it on eBay.
I bought it on eBay.
