For Sale 2.5 petrol engine

Decided to sell the 2.5 engine that I was rebuilding for my Series 3.
It's a 2.5 block with head and front cover from a 2.25 Series.
The block was re-bored +20 by Turners, deck honed and new core plugs and cam bearings fitted.
The head is 8:1 unleaded, also recon by Turners.
New parts fitted:

• crankshaft & conrods, AES pistons, Glyco bearings
• oil pump
• camshaft
• skew gear
• tappets
• chain & tensioner
• water pump

In fact, the only moving parts not replaced are the cam gear and the rockers (although they are re-bushed and the rocker shaft is new).
Re-con A115 alternator, new Ducellier distributor (points).
Rear cover and flywheel are included, just not fitted. Starter motor also there (not tested). No fuel pump.
I have a Weber 32/34 DMTL carb that needs a rebuild that I'll include as well.

Re-built by the book during lockdown, all clearances within spec, photos of all stages. All receipts available.

I have most of the original 2.25 parts (fan, manifolds) if you want to make it look more like a Series engine.
Asking £2,250. Located in TD5, Scottish Borders. Any questions, please ask.

A very fair price considering the work done.

Nice bit of kit that glwts