1986 90 Exhaust

B

Bob Hobden

Guest

• Apr 5, 2006

• #1

There is a broken bracket and"D" fixing (around the pipe) loose on the front
pipe of my 1986 90 2.5 petrol, where is it supposed to fit on the
engine/chassis? I can't see for looking.
Anyone got an exploded view of same exhaust they could mail me?
The exhaust comes in 4 parts if that helps.

--
Regards
Bob
"Never get so busy making a living
that you forget to make a life"

 

O

Oily

Guest

• Apr 5, 2006

• #2

"Bob Hobden" <[email protected]> wrote in message
news:[email protected]...
> There is a broken bracket and"D" fixing (around the pipe) loose on the
front
> pipe of my 1986 90 2.5 petrol, where is it supposed to fit on the
> engine/chassis? I can't see for looking.
> Anyone got an exploded view of same exhaust they could mail me?
> The exhaust comes in 4 parts if that helps.
>
>

I seem to remember repairing one of these a few years ago on an '84 petrol
110" and I think it is bolted directly to the block in the middle behind the
engine mounting about 2" above the top of the sump joint and fastened by a
10mm bolt (17mm head).

HTH Martin

 

B

Bob Hobden

Guest

• Apr 5, 2006

• #3

Martin wrote after...
> "Bob Hobden" asked...
>> There is a broken bracket and"D" fixing (around the pipe) loose on the
> front
>> pipe of my 1986 90 2.5 petrol, where is it supposed to fit on the
>> engine/chassis? I can't see for looking.
>> Anyone got an exploded view of same exhaust they could mail me?
>> The exhaust comes in 4 parts if that helps.
>>
>>
>
> I seem to remember repairing one of these a few years ago on an '84 petrol
> 110" and I think it is bolted directly to the block in the middle behind
> the
> engine mounting about 2" above the top of the sump joint and fastened by a
> 10mm bolt (17mm head).
>
Thanks, I'll take another look tomorrow then it will be a case of hunt the
correct bracket or make one.

--
Regards
Bob Hobden
17mls W. of London.UK

 

D

Dougal

Guest

• Apr 5, 2006

• #4

Bob Hobden wrote:

> Martin wrote after...
>
>>"Bob Hobden" asked...
>>
>>>There is a broken bracket and"D" fixing (around the pipe) loose on the
>>
>>front
>>
>>>pipe of my 1986 90 2.5 petrol, where is it supposed to fit on the
>>>engine/chassis? I can't see for looking.
>>>Anyone got an exploded view of same exhaust they could mail me?
>>>The exhaust comes in 4 parts if that helps.
>>>
>>>
>>
>>I seem to remember repairing one of these a few years ago on an '84 petrol
>>110" and I think it is bolted directly to the block in the middle behind
>>the
>>engine mounting about 2" above the top of the sump joint and fastened by a
>>10mm bolt (17mm head).
>>
>
> Thanks, I'll take another look tomorrow then it will be a case of hunt the
> correct bracket or make one.

Bob

Give me somewhere to send an e-mail with an Acrobat attachment. My
e-mail address works after the obvious change.