JD wrote:
> Nige wrote:
>
>> Dougal wrote:
>>>> Anybody got a nice exploded diagram of a 110 station wagons panel
>>>> arrangement?
>>>>
>>>> The door & floor area is more apt!
>>>>
>>>> Nige
>>>
>>> Nigel, I've got the parts book and will extract the relevant pages
>>> if you can explain exactly what you're after.
>>>
>>> I presume that, having removed the filth, your e-mail address is
>>> valid. ,
>>
>> I, It sure is, I'm after the bit that the CSW has to bolt the rear
>> door hinges onto & what it also bolts (welds etc) onto, top & bottom.
>>
>> Richard at beamends thinks it could be a full side of the car. As in
>> the bottom bit (that the floor screws into etc) is joined to the
>> door(rear) hinge panel!
>>
>> Hope not, the rear door hinge upright is fine, but the side floor
>> channel is rotten to death!
>>
>> NIge
>>
>>
>> Subaru WRX (Annabel)
>>
>> Landrover 110 County Station Wagon (Tyson)
>>
>> '"They called him Jimmy the gent"
>
> If I understand you rightly, your hopes are dashed. The door pillar
> between front and rear doors is in one piece with the sill frame that
> runs along the bottom of both doors. However, the sill frame is made
> of straight channel and some owners have reported success in
> fabricating one from angle iron and welding it to the pillar.
> JD
Thought as much, I'll get my welding chap to price it up!
Ta
Nige
--
Subaru WRX (Annabel)
Landrover 110 County Station Wagon (Tyson)
'"They called him Jimmy the gent"
