Hi all, my 110 recently has developed a bad case of the shakes thru the steering wheel and gearstick between 40-50 mph. It feels like the wheels are about to drop off its that bad. Anyone got any ideas? Wheel nuts are tight, so are uj's, very slight play on front steering arm but its been like that for while.
110 csw with the shakes
- Thread starter shrek1
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Andy Land
Well-Known Member
- Posts
- 4,499
- Location
- ... en route to Cuckoosville.
Swivel bearings need replacing would be my guess (same as mine) ... jack up the front, grip a wheel and give it a good shake and see if it moves ... that will tell you. Make sure you use axle stands for obvious reasons
Thor1950
Well-Known Member
- Posts
- 39,238
- Location
- Land of the midnight sun
steering dampener could be shot or the ball joints. sound like u need them replaced. how many miles on them?
tottot
Well-Known Member
- Posts
- 8,493
- Location
- west wales coast
Check swivel preload.[sure I have said this today all ready]
tottot
Well-Known Member
- Posts
- 8,493
- Location
- west wales coast
There you go, the list of things that can give you the shakes is quite long. Cheers.
