tomcat59alan
Well-Known Member
- Posts
- 18,611
- Location
- wirral and triquivijate
I was thinking more of the vibration damaging a filament in one bulb so the other stays lit.
P38A Airbag fault after new windscreen fitted
- Thread starter tomcat59alan
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 58,170
- Location
- Preston Lancs.
A possibility no doubt.
RangeRoller dt
Well-Sprung Member
- Posts
- 14,263
- Location
- Trapped inside my head @ LZ asylum
If your bulb is constantly lit it could be just that - the bulb. Battery tip top?
Perhaps it’s beginning to dry out now it’s under cover
Perhaps it’s beginning to dry out now it’s under cover
- Posts
- 31,406
- Location
- North Shropshire
If one bulb is out of should be slightly dimmer on one side of the SRS. not really noticed if you don't look for it and the ambient light isn't just right
tomcat59alan
Well-Known Member
- Posts
- 18,611
- Location
- wirral and triquivijate
Thinking about it it does seem dimmer.tomorrow shall tell.
- Posts
- 4,458
- Location
- Rotherham
Prefer sniffing the white powder these daysUse smokeless cartridges mate or are you still on black powder?
- Posts
- 18,963
- Location
- Buckinghamshire, UK. ('95 DT)
That sounds plausible. Or even the vibration causing a bulb to not seat properly. I had a bugger of a time reseating one of mine and needed the Nanocom to reset the fault.
- Posts
- 12,139
- Location
- Sud ouest France !
@tomcat59alan have you scanned for any faults?
tomcat59alan
Well-Known Member
- Posts
- 18,611
- Location
- wirral and triquivijate
No mate.checked the bulbs today both ok,will have to power up the old laptop and see what occurring.Left the car out of the garage tonight to check the heated screen is working before they come back on Saturday to finish the job.
No mate.checked the bulbs today both ok,will have to power up the old laptop and see what occurring.Left the car out of the garage tonight to check the heated screen is working before they come back on Saturday to finish the job.
Put a mug of something hot on the dash... Then turn the screen on. That'll tell you if it's working
tomcat59alan
Well-Known Member
- Posts
- 18,611
- Location
- wirral and triquivijate
You've got your model well trained,mine comes to the window to make sure I'm not enjoying myself tooo much or I haven't frozen to death.Put a mug of something hot on the dash... Then turn the screen on. That'll tell you if it's working
Last edited:
allanw
Active Member
- Posts
- 181
- Location
- NORTH YORKSHIRE
It took four visits to fit mine last month. First guy turned up and said it was going to rain so left? Next guy said he didn't have the correct trims so left. Third guy turned up in the rain and said his awning not tall enough to cover the car. Number. four fitted it. This took three weeks in all.
Karlos the jackal
Well-Known Member
- Posts
- 465
- Location
- Norfolk
was that auto glass again took about 3 weeks for mine to be fitted to
tomcat59alan
Well-Known Member
- Posts
- 18,611
- Location
- wirral and triquivijate
Luckily I have a garage big enough to get the car in and for him to work around it.I got a phone call in the morning asking if I could go to their depot as "the weather looks iffy" I told him no as I'm shielding, he was happy when he arrived. Nice guy and he wouldn't fit the new top trim because it had a dent in it. That's being fitted tomorrow. Must get dressed and go and test the heated screen before they come.
tomcat59alan
Well-Known Member
- Posts
- 18,611
- Location
- wirral and triquivijate
Well I tested the screen and only the near side works,looked at Rave and they couldn't make the set-up more complicated if they tried
got the old laptop running so when I'm waiting for the screen guy tomorrow I can have a look for the airbag fault and the screen relays. Number 5 is ok as the n/s is working got to check if its powering number4.for the o /s.
Karlos the jackal
Well-Known Member
- Posts
- 465
- Location
- Norfolk
when I checked mine the driver side was clearing quicker than passengers side my neighbour who id a electrician tested it and found the driver side was using more polarity than the passenger side he said was about 2 amp differential in themWell I tested the screen and only the near side works,looked at Rave and they couldn't make the set-up more complicated if they tried
tomcat59alan
Well-Known Member
- Posts
- 18,611
- Location
- wirral and triquivijate
What was the solution mate, I had an electric kettle to steam up the inside,I'll have to get it boiling again.
Karlos the jackal
Well-Known Member
- Posts
- 465
- Location
- Norfolk
mine was done with a icy window I just left it mate passenger side is about 2-3 minutes slower clearing but I can live with that mate didn't want to pull things about and make it worse if it working I'll leave it alone
tomcat59alan
Well-Known Member
- Posts
- 18,611
- Location
- wirral and triquivijate
Cheers,I'll still check out the number 4 relay to make sure its powering up the o/s of the screen.,need to make sure the faults not with the replacement.
Karlos the jackal
Well-Known Member
- Posts
- 465
- Location
- Norfolk
yeah I didn't think to check the relay to be honest I just thought seeing as though is working it best to leave itCheers,I'll still check out the number 4 relay to make sure its powering up the o/s of the screen.,need to make sure the faults not with the replacement.
