What have you done to your Freelander today

[Epicuser]

Plugged in a Scangauge11

 

[IndiTd4]

plugged in a scangauge11

and??????

 

[Kizzeh]

Bulb went out in dashboard. Hit dashboard. Light works.

 

[bushwwacker]

Nowt.

 

[Freelaner]

I drivved it to work and left it there, cos i'm bound for cambs int morning.

i have the company van

 

[davef2901]

Took dogs (& wife) to seaside for a change. No mud to play in. Dogs happy. Thinking about taking wife's RAV4 to bits cos I'm bored. Actually, I think the MAF & throttle body are due a good clean, so I'll annoy her by doing that.

 

[Epicuser]

and??????

Discovered that the engine temp is only 69c.

I need a new thermostat. I have a Gates one on order.

 

[Spacemonkey...]

Drove to work and back. 3.5 hours there, 2 back. Joy...

 

[Skynet]

Tried to get my Bluetooth OBDII reader to talk to Torque Pro app on my tablet.... keeps losing connection grrrrrr

 

[Spacemonkey...]

Ah, I've heard about that one. Let me know if it's any good if you get it working... Does same as Scanguage doesn't it?

 

[Epicuser]

Ah, I've heard about that one. Let me know if it's any good if you get it working... Does same as Scanguage doesn't it?

Sounds like it. Not aware of one that works with iPhone/iPad yet. But I may have missed something as they are supporting more hardware. About time too.

 

[bukko]

Sounds like it. Not aware of one that works with iPhone/iPad yet. But I may have missed something as they are supporting more hardware. About time too.

I bought this and this.

Will let you know how it works.

 

[Epicuser]

I bought this and this.

Will let you know how it works.

Looks interesting. Keep us posted.

 

[Barry6690]

Eventually got round to sorting out the sump Guard I got off Dunc, many thanks mate.

cleaned



primed,



painted,



will post pic when fitted.

 

[bukko]

How much does it weigh, approx?

 

[edwardcraney2012]

You got a green outline of an undertray on your wall now?

 

[duncanpage4]

I fitted the lift kit to the rear shocks.
Was a b**ch to get the strut released to drop down enough to get the kit in. Lots of WD40, swings of the hammer & a few stern words & they eventually let go!
Doing the fronts tomorrow.

 

[bukko]

Are you gonna do the fronts as well or leave it in dragster mode?

 

[Spacemonkey...]

Blimey, someone torched your car mate?

I assume it was just sticky to the bodywork at the top mount..?

 

[bukko]

Serious questions:
Are those 40mm and did you only have to undo the top of the strut, or did you need to undo the bottom as well?