What have you done to your Freelander today

[Epicuser]

Fitted some LED CREE side lights. They are bright! They will do instead of DRL's

 

[Epicuser]

Bell Engineering fitted a reconditioned VCU & bearings. Well worth the 390 mile round trip. (Combined with a couple of visits as well)

 

[pardec]

Replaced both front wishbones, drop links,ball joints and all front bushes. While i had the under tray off i painted it satin black.

Feels a lot more solid at the front now and looks better with the under tray black

 

[Duncp73]

Fitted some LED interior lights

 

[JC600]

Looking good Dunc.

 

[Tempus Fugit]

Cleaned and painted the rear drums as well as the spare wheel carrier.

Had to drill out he knackered drum retaining screws though but replaced them with some nice allen key ones.

 

[spacecowboy2442]

Today I took my hippo for it's first mot in my ownership. While waiting in the viewing area and daring not to look I happened across a LRO magazine dated august 2012. Cracking 15 years of freelander article staring a freelander owned by a Jamie Cox. Guess thats Jc600
Anyway many minutes later im beckoned with a request for £ 40 in return for a clean bill of health.
Grrrrrrrrreat.
Ta very much.

Thats what I done with my freelander today.

 

[tincan]

just had a new vcu courtesy of the nice men from bell engineering 183000 on the original well happy

 

[kernowsvenski]

Done the crankcase filter to cyclone mod. Cut a hole in the sump guard and changed the oil. Enlarged the new hole in the sump guard and cleaned up the old engine oil from the sump guard and dad's garage floor!

 

[vilguy]

set fire to it..... no really

 

[Epicuser]

Done the crankcase filter to cyclone mod!

Do you know what the part number is for this?

 

[kernowsvenski]

do you know what the part number is for this?

11 127 799 367

 

[Epicuser]

11 127 799 367

Thanks.

Is that the BMW one?

 

[kernowsvenski]

Thanks.

Is that the BMW one?

Yeah, ~ £30

 

[Epicuser]

Yeah, ~ £30

Thanks

 

[Epicuser]

BMW gave me part no 11 127 799 224. It is a cyclone one and looks like it might Fit.

I will see.

 

[Epicuser]

Fitted a Witter detachable towbar today. Just waiting for the electrics to arrive as I don't want to do the cut and paste job. I'd rather just plug in. Will convert to 13pin as well.

 

[kevins]

changed anti roll bar bushes and anti roll bar drop links, also fitted engine cover bought of flebay

 

[Epicuser]

Got my o/s rear large Hardon Kardon speaker working.

I now need a new connector for the tweeter above it and possibly new contacts as they look broken. Hmmmm.

Slowly getting the car sorted.

 

[gallon8]

av tried to repair me central locking , i recently snapped the key in the driver door, av followed the indtructions it isnt resetting, the rear door opens but not the two front doors, i can hear the the lock mechanism operating but it does not open the doors , av sent away for some tools to get the snapped bit out, any ideas would be appreciated. thanks:confused2: