breaking 300tdi discovery

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

glenny117

Active Member
Posts
193
Location
hemel hempstead
as luck would have it im having a run of bad luck since my first landrover has since died on saturday morning

history of this land rover discovery as follows
has had head gasket problems for the past 3 months and had a new gasket fitted and 2 weeks later leaked again and then on 2nd of june had a complete new cylinder head fitted and then 3 weeks later im traveling to work the whole engine gives up just 6 days after having its mot...

so i have came up with the idea of stripping it as far as the cylinder head goes im going to try and send it back but if not it will be up for sale.
it is a 300tdi manuel r380 in metallic blue


so any parts you just ask some parts have already been spoken for which are
front radius arms, front axle and all shocks and springs and front diff.

The radiator is 3 months old cost me 120 and wheel bearings are 6 months old

And the cylinder head is now for sale it is used but was fitted for only 3 weeks
 
Last edited:
sorry but the wheels I forgot to mention are not for sale.
and the indicators are orange and will be £10 each or 15 pair + p&p
headlights £15 each +p&P
wing mirrors £15 each +p&p

as for brake lines I will not sell as they are really bad looking
rear brake discs £20 pair +p&p

and the keys and barrels £35 +p&p that's for ignition and two front doors yh? even boot barel
 
Is it 3 door? If so I need the drivers side b-post black trim and fittings, the bit between drivers door and rear opening window.
 
Oh front axle is now available and radius arms

And unfortunaly i couldnt get all the bits some of you askef for today but will keep you posted.
As i was sorting out my 200tdi i just got
 
Back
Top