Rear bulkhead removal

[Dr_evil]

Anyone got pics of where the spotwelds etc are that need drilling out to remove ?

Took off most of the visible rivets today but couldn't get it out, presume I'm missing some hidden ones

Or is it just a case of chopping with a grinder and 1mm blades ?

 

[Pikey]

look for the little dimples in the metal

 

[griffman]

Doc
I can advise you on this ....................................but I will charge you.....................................one hundred million dollars..........................................

 

[Thor1950]

not another thread on the same project Still tha king cab thingy????:emps1::emps1::emps1:

 

[Dr_evil]

Can't see te dimples as the guys painted eveywhere with tuff coat :doh:

 

[Thor1950]

Can't see te dimples as the guys painted eveywhere with tuff coat :doh:

Remove it then:emps1::emps1:

 

[Dr_evil]

don't have my grinder with me…………a general location is all I need then I can use some sandpaper to find them

 

[craigyb]

don't have my grinder with me…………a general location is all I need then I can use some sandpaper to find them

Somewhere around the seam

You do ask some rather stupid questions sometimes :jaw:

 

[Devs90]

Ffs search

 

[Dr_evil]

searching brings up #### all :doh: I want to know how to remove the whole thing as a unit

searching bulkhead removal only brings up bulkhead removal bars which is just chopping the bulkhead at the seatbox, not what I want to do……...

 

[Dr_evil]

Somewhere around the seam

You do ask some rather stupid questions sometimes :jaw:

too many seams to bother sanding by hand……..that tuff coat stuff is an arse to remove!

 

[Thor1950]

too many seams to bother sanding by hand……..that tuff coat stuff is an arse to remove!

propane torch and wire brush comes to mind

 

[craigyb]

too many seams to bother sanding by hand……..that tuff coat stuff is an arse to remove!

You're a lost cause :emps1:

 

[Devs90]

searching brings up #### all :doh: I want to know how to remove the whole thing as a unit

searching bulkhead removal only brings up bulkhead removal bars which is just chopping the bulkhead at the seatbox, not what I want to do……...

Oh really so how come it took me about a min to search and find the last post of this thread hmmmmm

http://www.landyzone.co.uk/lz/f7/defender-90-bulkhead-removal-bar-134265-2.html

 

[Turboman]

propane torch and wire brush comes to mind

Or one of they electric paint stripper things and a scraper, Heat it up and scrape it off!

 

[Dr_evil]

propane torch and wire brush comes to mind

got a wire brush somewhere…….no propane but may have an old heat gun knocking about somewhere

 

[Thor1950]

Or one of they electric paint stripper things and a scraper, Heat it up and scrape it off!

we are old school and they haven't taught that at UNI yet

 

[Devs90]

Or look at the link I posted with spot weld locations In

 

[Dr_evil]

Oh really so how come it took me about a min to search and find the last post of this thread hmmmmm

http://www.landyzone.co.uk/lz/f7/defender-90-bulkhead-removal-bar-134265-2.html

He's chopped that………you can see the ragged edge on top of the seat box.

I want to remove the unit as a whole and move it back as a unit not chop it out

 

[Thor1950]

is Doc going down in

Mitsubishi A6M Zero Shot Down (1) - YouTube