Search results

Ok so got it back again from the garage, the reason for the loss of water was that the mechanic that changed the engine put a hose too close to the crank shaft (i think that's what the second mechanic said) which cut a hole in the hose. Took it for a drive. Then off to work (26 miles away) then...

So i finally got the car back from the garage. They checked the Gear box oil and the guys took it for a spin and advised that the Gear is all good. They found out the problem was the Crank Sensor. when the car heats up so did the sensor and started to fail and cut off the engine. Only when it...

Hi Nodge, My V6 suffered a loss of power at 40mph. got it towed back home then it started to drive. Also would it be common fault with having an engine change? I had my V6 changed with a 2002 (85k miles) into a 2001 freelander with 95k on the clock. I Also noticed the during kick down it...

Hi Ragged, Did you manage to sort out your problem with the HDC? I'm only asking because i have the same issue with mine. I did not remove the center console just moved the leather around the gear stick and pushed the plug up and tested it. No power was going into the Switch.

Thanks for the info teddy, I will ask my electrics mechanic to have a look at it if not I'll probably take it to a LR garage or service to rewire it. I will check the good LR garage Fred for one that's local. It's a shame that the quality of cable has been replaced by the cost of the cable...

Hey there Nodge, I took off the switch, checked the contacts in the switch and no dirt. Also checked the connections and there is no power going into the plug that connects to the switch. How would I be able to check where the cables are coming from and to see where / if it is disconnected...

I checked the switch, took out the button. unplugged it, never saw any dirt or dust in the connection. cleaned the crap that was in the gear stick area and re-connected the plug placed everything back and still the same problem. Would it be a fuse issue? Thank you Nodge68 for your knowledge...

Hi there Nodge, I checked the Speaker connections and that was the culprit. It works now :bounce: I had a quick look at the connection to the HDC, i just removed the leather around the gear stick and it was still connected, i did not take off the plug and then re-connect it. I will do that on...

Speakers been replaced with new FLY 6 intergracial component and traixal speakers. Near perfect fit just cut the mountings off the factory standard drilled 1 extra hole in the door. also used the connections on the factory speakers on the new ones. I'm thinking it could just be the cables need...

Hi all, I had a post (Hello & Help) in December regarding a Brake Servo problem with a Converted 52 plate V6. This is an update regarding the conversion. I took it Land Rover for a (Free) safety check up and the reason for 2 problems (right side speakers working depending how loud the music...

I did buy a full LHD wiper motor and Assembly. It was my own stupidity when I put on the RHD wiper arms on (incorrectly) the LHD assembly which screwed up the teeth of the assembly.

Ok found out what the problem was, the Teeth on the Assembly were ground down by the Wiper arm (which also ground the teeth on the wiper arm itself). This caused the wiper arm to lose position and then sticking towards the bonnet area and becoming stuck. There was bits of metal shavings in the...

Ok did a re-fit of the wiper with no joy. I have put the rhd assembly back on the car and now this has the same issue as the LHD wiper. I can now only think that it could either be the plug that connects to the motor or the wiring as I needed to extend the cable.

Here is a thought for anyone with electrical knowledge. Would it possible that the way the wiring is done is for a RHD motor is affecting the LHD motor to act like its resetting itself as a rhd?

I do have a LHD motor and assembly. I will try to re-fit the arms again in the morning. Thank you for your responses.

Hello all, I would like some help from yourselves if possible. I have an issue with my LHD (converted) 2002 V6 front wipers. I have changed the wiper assembly from RHD to LHD. when I connect the wipers back, rather than working normally they just go down further than their normal position...

Freelander 1 - 2002 V6 Bought in August 2012 78000 miles - Currently 81000 miles. plenty more to come, :D

Hvala Ti / Thank you I am very relived at this point. :D

Hi Dave, Yes i did buy from a couple of polish guys, But i found them on "gumtree" Thanks for the information, i will get it checked by someone that knows about Freelanders. I will post the results of the test. My mechanic found the problem, it was the servo pipe that was disconnected...

Ha So you do know something :D Thank you for the information.