Search results

Hello. Has anybody fitted one to a discovery 1? Im thinking of fitting one into the engine bay. Any advice would be appreciated. Thanks

Hello. Im servicing my disco shortly. Is there any advantage to using 5 40 fully synthetic engine oil? I can get 10 litres for free. In the past i have used 10 40 synthetic semi syntetic and mineral oi. . Ive also used super universal tractor oil. Its allways depended on whats avaiable. Has...

Hello all.im having an issue with my 300 tdi auto edc. When going uphill at about 3000 revs they momentarily die off then pick up again. It doesnt do it all the time. Its like it trying to change up but dosent. Im a bit stuck with it. Any help will be appreciated. Thanks

Hello. Im having a problem with my discovery 96 auto. When going up hill gearbox wants to change up a gear,revs drop off but dosent change gear. Ease off throttle and the revs pick up again. Only happens when going into top gear. Has anybody got any ideas? Thanks

Hello. The lights on the dash board and instrument cluster sometimes go out when driving with lights turned on. The head lights also fliker slightly sometimes. Dash lights sometimes go out the come back on and sometimes do not come back on. Any ideas where i should start looking for the fault...

Hello. The air suspension is not working on my disco. The sensor arm on the passenger side snapped allowing air bag to fully inflate on that side. I set sensor into a lower postion to get back end down. Both sides have now fully deflated and will not go back up. The compressor is not starting...

Hello. Ive got a discovery 2. Theres a loud grinding noise coming from front wheel. Replaced discs and pads as they were worn. Still had same noise. Removed hub. Felt ok when turning. Split hub to check bearings. They apear to be ok. Has any body got any ideas? Was going to clean hub bearings...

Hello. I'm painting the bonnet and roof of my discovery 300tdi Epsom green. I'm thinking of using coach enamel from paintman. Has anybody got any experience of using this paint and pointers on how to use. Thanks

Hello.I'm repainting the roof and bonnet on my 300tdi Epsom green discovery. I'm thinking of using coach enamel from paid than paints.Has anybody used this paint and has anybody got any pointers. Thanks

Hello. The vacuum pump on my 300tdi discovery has one of the core plugs missing. It's the one on the right hand side. The pump still produces vacuum and is not leaking out of the missing plug hole. Does the core plug hole the valve in place and is the car ok to drive until I'm able to repair it...

Hello. What is the biggest size battery I could fit into battery tray of a 300tdi discovery? I've done a search but it's not working.

Hi I've replaced the broken window regulator on disco 1 drivers door. The window will now not sit square in runners and rattles when open. Any ideas how to adjust? Cheers

Hello. My central locking has stopped workers by on the fob. Locks try to move but then stop. Central locking stopped working on key a while ago. There's a clicking under glove box when latch on diversified lifted. Took the actuator on drivers door apart. Spins one way when fob pressed but only...

Hello. Thinking of fitting 110 vented callipers onto my discovery 300 tdi auto. Is it a straight swap of callipers discs and pads? Is the disco brake master cylinder ok to use? Thanks

Hello. The brakes on my 300 tri auto with abs seem to be slipping then grabbing when come to a slow stop. Discs pads and wheel bearings were all replaced 6 months ago. Every now and again the brake pedal will go hard and a standing and grating noise comes from abs. Only happens at low speed. If...

Hello. I've got a pulsing through brake pedal on my 300 auto. I've recently changed front discs and pads. The pulsing was there before brake change. The pulse coincides with a squeak from brakes. Any help would be appreciated.

Hi. I've recently had brake peddle creeping to floor. Changed master cylinder for a new Lucas one. Bled brakes through until fluid came through. Gone through 5 litres of brake fluid. Had disco jacked up in air on each corner. With engine running peddle still goes straight to floor. Bled using a...

Hello. Does anybody know how to wire up the window switch or have a digram for my 300 tdi disco? Which wires go to which number terminals?

The gears on my disco will not engage when engine is running. Will go into gear when engine is switched of and will drive when started. No loss of fluid in resevoir, taken slave cyl off and it moves when peddal is pressed. Clutch fork not worn through,reinforced last time clutch was changed 14...

i have had clattering brakes for some time. They worked fine though, Just stripped the front end down and as someone was walking past they said i had a rubber pad missing of the back of the brake pad. The piston bites into it and stops the pad from moving up and down in the caliper. went and...