wastegate arm free?

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
L

LONEWOLF

New Member
Posts
77
ok, few posts on here bout wastegate arm seized, and need to free it off, i,ve done this but how free does it have to be? mines moves with pliers but is under resistance, is this normal?
 
Edit, sorry,

the arm should be free, on my old Jap- toy you could move it with the hand.
I didn`t check on the Landy but I don`t think this is the real problem, it might be the actuator switchnot working properly
 
Last edited:
The Wastegate is spring loaded, it should only move if the engine is under load. to see if everything works fine fit a pressure gauge and look
 
You must log in or register to reply here.

Similar threads

D
Freelander 2 - Hand Brake Balance Arm
Replies
3
Views
357
Arctic2
Arctic2
bahteles
Disco 2 Td5 No power after 2.5k - 3k RPM
2
Replies
26
Views
2K
sierrafery
sierrafery
S
110 TD5 steering play
Replies
8
Views
954
v8250
v8250
T
Disco 2 Chassis welding advice - near rear trailing arm bracket
Replies
6
Views
1K
frostythor
frostythor
JohnM70
L322 Suspension Lower Arm wear causing judder?
Replies
19
Views
1K
blue beasty
blue beasty
Back
Top