andyfreelandy
Well-Known Member
- Posts
- 5,521
- Location
- Devon
Now then, had this problem a while ago, on full lock noise (deep pitched grind / vibration) comes from rear axle area. Panicked and got a new VCU from Bell.
All was quiet until recently, VCU has now done 3k miles and noise and vibration is back.
Any ideas?? Had a look underneath and all looks solid, no subframe movement, bushes look o.k although am going to change front diff one as slight crack.
Tyres all matched and have similar tread. Will re-check VCU with test and compare to when first fitted.
Must have happened to someone else?
Thanks.
All was quiet until recently, VCU has now done 3k miles and noise and vibration is back.
Any ideas?? Had a look underneath and all looks solid, no subframe movement, bushes look o.k although am going to change front diff one as slight crack.
Tyres all matched and have similar tread. Will re-check VCU with test and compare to when first fitted.
Must have happened to someone else?
Thanks.