Grinding & Vibration on right turn?

Just wandering if anyone has heard of this. For some reason on fast right turns like going round a roundabout I get a grinding and vibration possibly coming from the rear passenger side wheel. I thought it was the swing arm bush so had it changed but on fast cornering it still does it?

Any ideas?

it could be wheel bearing as you are going round a round about it will put more pressure on the bearings

Have you checked the front diff mount? That is more of a thump than a grinding but might be worth looking at if you haven't looked already. Had the same on roundabouts with mine.

Finally got around to getting this looked at in the garage and they couldn't find anything only a bent brake shield and that it needed a front ball joint so its all a bit of a mystery?

But at least I know its nothing dodgy going on to worry about.

Mine did the same. do you still have 4wd if so have you done the 1 wheel up test?

Should still be 4wd. Whats the 1 wheel up test?

Grendel said:

Should still be 4wd. Whats the 1 wheel up test?

Click to expand...

VCU test. See: http://www.landyzone.co.uk/lz/1011839-post2.html

I had that and soon after the VCU disintegrated. I would certainly have that checked. I managed to get a reconditioned one but it still hurt the wallet.

The VCU was replaced before I bought the car so hopefully its not that.

Grendel said:

The VCU was replaced before I bought the car so hopefully its not that.

Click to expand...

It would still be a good idea to test yer vcu. If anything to rule it out and so you know it's true condition.