Discovery 300 Tdi sudden ticking/tapping noise

You mean the brand? If so it was LR genuine parts, as for head skimmed and pistons are in perfect height also the tappets ware adjusted according to the exact size of the thin measuring tool "don't know what do you guys call it"
But it was fitted between the caps and the tappets
Please see the video here

jamesmartin said:

which head gasket did you use ,was head skimmed and piston height checked, are all the tappet adjuster nuts have the same amount of thread poking out above

Click to expand...

Amer said:

You mean the brand? If so it was LR genuine parts, as for head skimmed and pistons are in perfect height also the tappets ware adjusted according to the exact size of the thin measuring tool "don't know what do you guys call it"
But it was fitted between the caps and the tappets
Please see the video here

Click to expand...

was the depth of valve measured after head was skimmed, its a feeler gauge thats used for measuring the valve clearance

jamesmartin said:

was the depth of valve measured after head was skimmed, its a feeler gauge thats used for measuring the valve clearance

Click to expand...

Always learn something new from you, thnks .
Yes it was measured and psi i check on 200++







img host

are the threads on the valve clearance adjuster nuts all the same

jamesmartin said:

are the threads on the valve clearance adjuster nuts all the same

Click to expand...

Yes all the same perfectly,,,

jamesmartin said:

are the threads on the valve clearance adjuster nuts all the same

Click to expand...

Yes all the same perfectly,,,