Aha exactly my thought, useless ****er! Waste of £12 then, they'll be getting a letter of complaint! Shall i say it ruined my steering box and pump and I require immediate compensation? :D. So I need Dexron 2 ATF? I knew what the bubbles were, just it seemed like a chemical reaction was...

So I needed some fluid to fill up my power steering since i removed the pipe work when stripping the chassis down so i popped into halfords and got some 'Power steering fluid' as the bloke in there told me i did not want Automatic transmission fluid as my landy is considered old. So i got home...

Seems to have worked, thanks!

I'll check it out, it would kind of make sense since I have not gone around and checked all the earths yet! Thanks

So I am in the middle of a rebuild and have swapped over to a 200tdi loom from the original TD one. I can only get it started if i bypass the starter relay. I've tried multiple relays and its still the same; it just clicks and does nothing. On random occasions when i go to start it begins to...

I just need the calipers as everything else if fine. Johnlad how much? I can then look at cost of a courier and go from there. Cheers

Hi, I am after a pair of brake calipers to fit my 1987 90 completely standard. Not vented. I am in Bridport, Dorset so either I can pick up locally or I can sort out a courier. Cheers Jasper

I'll probably try and do the same if I can find one. I like the idea of the pins and straps but the would still involve me making the metal brace thing look tidy which would a big job in its self.

There are more holes in it than metal so patching would literally be re-doing it aha! I suppose I could have a go at making one but there are several tight 90 degrees bends followed by another which makes bending practically impossible so would need a press and I havent got one. Probably just...

Hello Fellas, As a whole, my bonnet is in quite good condition except underneath the front where there is a terraced metal plate welded to the frame and riveted to the bonnet; the plate that the catches and stops are attached to. I was wondering if anyone knows of a place that does these...

Cheers for the response fellas, do any of you reckon Evo stik Gripfill would work? I've got a box full of the stuff

hi, I was wondering what type of 'glue' people use to stick their door skins to the frame? Obviously its mainly held by the folded ali however i had to unpeel my old ones so figured a glue should also be used. So if someone can recommend something it would be great. Does it need to be soft...

Cheers guys I'll get on ordering it now!

Please may someone be kind enough to identify this part and suggest a part number so that I can buy it please. Its the part that has two connectors in the same plane that connect some fuel lines together. I'll try to take a photo of the actual part by my phones camera is playing up Cheers

I think I may have sussed it! Cheers for the responses though. Jasper

Hi, I am redoing all of my brake lines after stripping my landy down but I was a bit silly and didn't take photos of the brake pipes. It was a while ago since I took it apart and I haven't a clue where the old pipes are so cannot use as a template. I have managed to figure out the rear pipes...

Sorry, I thought when i composed the original post and clicked defender in the drop down box that was sufficient. But yeah, not fussy as long as it'll fit and isnt rusty!

Its for a defender, Sorry, my bad i thought I'd specified originally. How much are you looking for it?

Sorry Fellas that I haven't been replying, been away! Thanks for the replies, will contact you guys individually.

Hi, I am looking for a bonnet for my project. I live in Bridport, Dorset so need to be relatively close unless you'd be happy to post it - i'd arrange courier etc but would much prefer just to collect as that way saves me money :D. Cheers, Jasper