tarphenry

Well-Known Member

• Feb 3, 2016

• #1

Hi all, Bought the gizmo to disconnect the transmitter,but I am very confused with the wiring. On the "in" side, I have 3 connections marked on com on and on the "out" side its marked + and--. i do not have a clue which wires to cut or where they go and as usual no instructions .Any help would be greatly appreciated. thanks in advance.

 

T

tomcat59alan

Well-Known Member

• Feb 3, 2016

• #2

Connect the + and - to a battery and using a multi meter, check which connections on the in side make a circuit when the remote is activated. These are the ones you need to connect the cut orange wire ends to.

 

tarphenry

Well-Known Member

• Feb 3, 2016

• #3

Thank you for that,really appreciated

 

T

tomcat59alan

Well-Known Member

• Feb 4, 2016

• #4

Just reread your post and I think you will find on the "in" side it's on common on so if you use the middle (com) and either of the side on's you should be ok.

 

tarphenry

Well-Known Member

• Feb 4, 2016

• #5

Many thanks