gemsdad
NOT BOTHERED.
ok,thanks.i want to change my d2 ones for d1's because the blades are easier to get hold of and are cheaper etc.
gemsdad
NOT BOTHERED.
yes you can buy the newer type flat blades for the d2,but they cost £20+ for two,that is why i want to fit the earlier type with the hook end so the standard type flat blade can be fitted.
roger352
Active Member
The rear D2 fits as well, the one I got has the washer jet in the wiper arm. Straight swap but you have to cut away a bit of the spare wheel holder. You can either leave the D1 washer or as I did connected both up, mind you it was simple because I have the roof lining off to replace the lining.
gemsdad
NOT BOTHERED.
roger,i own a D2,not D1,so my rear wiper is ok,it was just the fronts i needed to know about.
sierrafery
Well-Known Member
i've just fitted D1's on my D2 cos i was fed up with the D2 ones, especially to prepare myself for winter when the D2 arms and blades(even the dedicated winter blades) are a nightmare at below -5*C...on the D1's you can fit any kind of aero blades which are more reliable
gemsdad
NOT BOTHERED.
exactly my point,that is why i want to fit them as well.SF pm inbound.
gemsdad
NOT BOTHERED.
why l/rover changed the wiper arm design is ridiculous,the hook type is great,the D2 type is crap.
Orch
Active Member
Yep!!why l/rover changed the wiper arm design is ridiculous,the hook type is great,the D2 type is crap.
