G

griff2

Active Member

• May 9, 2014

• #1

hi all

i have a 2002 td4 and this is fu...d on mine needs replacing
Land Rover Freelander 1 Lower Engine Mount Tie Bar Rod | eBay

thing is again the rubbers in them are crap so i would like to rebush mine with uprated ones

my question is will these fit ?

ROVER 200 Vi BRM UPRATED TORQUE REACTION ENGINE STEADY BUSH IN POLYURETHANE | eBay

and if so does anyone know of any other dealers selling these?

 

Skinny Mike

Well-Known Member

• May 9, 2014

• #2

Don't believe they'll fit as they're for a rover petrol engine.
Could be wrong though.
Mike

 

GrumpyGel

Well-Known Member

• May 9, 2014

• #3

Have a butchers at...

http://www.landyzone.co.uk/lz/f9/engine-moutings-256117.html

 

G

griff2

Active Member

• May 9, 2014

• #4

if you look atr the first link it says that engine mout fits the 1.8 and the 2.0 td4

so surely the bottom link bushes would fit ????

 

M

matt1295

New Member

• May 9, 2014

• #5

This was talked about the other month and the poly bush is the same

The bottom big bush is the same on all as the rover as other member took the risk to try it

 

G

griff2

Active Member

• May 10, 2014

• #6

seeing some one said you can get cheaper ones is this the same thing to
Powerflex - Performance Polyurethane Bushes

 

M

matt1295

New Member

• May 10, 2014

• #7

The big poly bush fits the td4 aswell as the di and 1.8

 

G

griff2

Active Member

• May 10, 2014

• #8

also would this
Powerflex Bush Poly Rover 200 (1995), 25 Gear Linkage Mount Rear | eBay

help make my gear stick less floppy ? i have a td4

 

M

matt1295

New Member

• May 10, 2014

• #9

Td4 uses a diff gearbox

 

G

griff2

Active Member

• May 10, 2014

• #10

i no the td4 uses a dif box but on the linkage where it connects to bottom of car there is a rubber part that looks very simialar to the last link ,i take it you dont think it will fit then :-(

 

Nodge68

Well-Known Member

• May 10, 2014

• #11

The large tie bar bush is the same in all Freelanders!! 1.8 or V6, L series or Td4.
As far as I know, the bushes at the bottom of the gear stick are also all the same. The gearbox end will be different as the boxes are from different manufacturers.