T

Terry 81

New Member

• May 31, 2012

• #1

I would like to say THANKS to the people who help with the over heating problem i had with my disco1.
Im having a problem with my fuse box and i need a new one, its for a disco1 1993 3.9L V8 it is not AMR5420 or ARM1552 or YPP100290L these are plug in this one is hard wired and has NO rellayes on it,I have put a photo of it in a attachment .I hope some one can help Thanks Terry

 

Attachments

• 
  no 012.JPG

  209 KB · Views: 5,042

StuRox

Well-Known Member

• May 31, 2012

• #2

Don't know if this is of any help...

12way 12v Accessory/custom install Fuse Box new | eBay

This is the search I used when I bought an additional fuse box for my second battery - might get something similar that will work??

As I ended up with this type of fuse box that has worked a treat - and for a fiver!

Also, here is my thread when I was looking for one...

Second Fuse Box

 

Last edited: May 31, 2012

A

arc

Active Member

• Jun 17, 2012

• #3

Its not much use to you but I just cut one of those out of a '91 200tdi disco1.
It has since been spliced onto my defender to replace the glass fuses.... but I've not seen one anywhere else.

I found this thread by through a google search. If anyone can find a part no I'd appreciate it! I can't find it in microcat....

 

P

Partysos

New Member

• Jun 17, 2012

• #4

StuRox said:

Don't know if this is of any help...

12way 12v Accessory/custom install Fuse Box new | eBay

This is the search I used when I bought an additional fuse box for my second battery - might get something similar that will work??

As I ended up with this type of fuse box that has worked a treat - and for a fiver!

Also, here is my thread when I was looking for one...

Second Fuse Box

Click to expand...

we used these as fuse boxes on 7 electric cars we built, they are still going 2 years later so i would say there a good bit of kit. Iv go a load of similar ones(single row of fuses) at work, if you pm me your address ill stick one in the post!

 

T

Terry 81

New Member

• Jun 23, 2012

• #5

Thanks for all your help Terry.