Koen

Active Member

• Dec 29, 2013

• #1

Hi all,

Looks like my ex-mod got series doors and they leak in between the door halfs. Now i have found the seals, but i cannot find the nuts and bolts part numbers which keeps the two halfs together. Do you guys know?

Thx

 

T

tomtomtom

Active Member

• Dec 29, 2013

• #2

The 'bolts' are actually threaded rods attached to the door top.

The bolts can be undone by either a 11/16 AF spanner or an 18mm socket.

Cheers
Tom

 

Koen

Active Member

• Dec 29, 2013

• #3

ah i see. ok, need to take good care not to $%^& up the thread then thx for the info

 

D

divie

Well-Known Member

• Dec 29, 2013

• #4

The nuts on later ones are 7/16" UNF Go easy undoing they have a tendency to rip the threaded bolt off the door top.

 

H

honolulujoe

Well-Known Member

• Dec 30, 2013

• #5

divie said:

The nuts on later ones are 7/16" UNF Go easy undoing they have a tendency to rip the threaded bolt off the door top.

Click to expand...

mine did that

had to get new tops

 

onecelledcreature

Active Member

• Dec 30, 2013

• #6

mine were a tight fit (****part) to get in and out when i was painting had to hammer them from the bottom and ####ed the thread up. needed to recut the thread afterwards

be careful with them