[Koen]

Hi all,

Looks like my ex-mod got series doors and they leak in between the door halfs. Now i have found the seals, but i cannot find the nuts and bolts part numbers which keeps the two halfs together. Do you guys know?

Thx

 

[tomtomtom]

The 'bolts' are actually threaded rods attached to the door top.

The bolts can be undone by either a 11/16 AF spanner or an 18mm socket.

Cheers
Tom

 

[Koen]

ah i see. ok, need to take good care not to $%^& up the thread then thx for the info

 

[divie]

The nuts on later ones are 7/16" UNF Go easy undoing they have a tendency to rip the threaded bolt off the door top.

 

[honolulujoe]

The nuts on later ones are 7/16" UNF Go easy undoing they have a tendency to rip the threaded bolt off the door top.

mine did that

had to get new tops

 

[onecelledcreature]

mine were a tight fit (****part) to get in and out when i was painting had to hammer them from the bottom and ####ed the thread up. needed to recut the thread afterwards

be careful with them