S

simon6949

Member

• Aug 21, 2013

• #1

Hi all ive got at least 1 stud snapped on exhaust manifold replacing all 10 at the weekend plus manifold gasket but do I need to have the manifold skimmed ?

 

50 pence

New Member

• Aug 21, 2013

• #2

simon6949 said:

Hi all ive got at least 1 stud snapped on exhaust manifold replacing all 10 at the weekend plus manifold gasket but do I need to have the manifold skimmed ?

Click to expand...

I'd say the the snapped studs were caused by the manifold warping. Get it checked at a good engineering shop. Should be about £40 to £50 to have it skimmed.

 

D

darrenm

Active Member

• Aug 21, 2013

• #3

I had a broken stud on mine a few months ago managed to drill it out with a left handed drill bit came out easy check and mine didn't need skimming

 

thebiglad

Well-Known Member

• Aug 22, 2013

• #4

simon6949 said:

Hi all ive got at least 1 stud snapped on exhaust manifold replacing all 10 at the weekend plus manifold gasket but do I need to have the manifold skimmed ?

Click to expand...

Check the manifold for warpage against a solid straight edge such as a steel rule. If it's flat it doesn't need skimming.

It's a good idea to cut into the webs between the ports with a fine disc cutter, this reduces the possibility of future warpage.


Dave

 

S

simon6949

Member

• Sep 7, 2013

• #5

Thanks all I had 3 snapped studs but all new now but did notice a few things melting so there must be some heat under there.