kato Disco · Sep 16, 2013

Anyone got any tips on how to get these out when the bold head has broken off?

jamesmartin · Sep 16, 2013

ignition lock bolts? you can drill them or just tap them round with a center punch or small chisel ,usually not very tight

kato Disco · Sep 16, 2013

Sorry probably got the wrong name for them. It's the steering stop bolts on the front hubs that I'm referring to.

Cheers.

Oldseadog · Sep 17, 2013

Centre pop then drill them out and re-tap the holes to clean them out.

kato Disco · Sep 17, 2013

Are the about m16 size thread?

Oldseadog · Sep 17, 2013

See what size the lock nut is and that should give you a clue!

agew · Sep 18, 2013

Maybe the lock nut is still on the back which is why...............

A

cowasaki · Sep 18, 2013

Or weld a nut on the end and use a spanner

THEengineer · Sep 18, 2013

broke mine annorl just fitted spacers to cure it

jamesmartin · Sep 18, 2013

kato Disco said:
Are the about m16 size thread?

m12 x 1.75,19mm head