C

cremator

New Member

• Feb 7, 2012

• #1

dph now doing the fleix air intake hose in silcone just ordered one

 

silkwood

New Member

• Feb 7, 2012

• #2

Just saw your post.

I mailed him yesterday if he would ship this item also to the Netherlands. He does, so I ordered one. I got the other three hoses also from him.

Do you know which diameter I need to replace the small/thin hoses in the engine bay?

Cheers

 

C

cremator

New Member

• Feb 7, 2012

• #3

hi there yes got my other hoses from them to they are very helpful which hose you on about

 

C

cremator

New Member

• Feb 8, 2012

• #4

well hose came and is alot better than the old cloth type one

 

silkwood

New Member

• Feb 8, 2012

• #5

Yes, Gareth is very helpfull. I also have the three Td4 hoses and now one the air intake hose, but I'm also interested in the small vacuum hoses to replace the small black one in the engine bay. A marten bite mine through a while ago and had to shorten it a little to fix it.

I still have to look which diameter they are.

 

C

cremator

New Member

• Feb 8, 2012

• #6

which hose are you on about in the engine bay

 

silkwood

New Member

• Feb 8, 2012

• #7

Above on the right. I'm not sure for the English word. Brake air tube??? or something like that.

 

Singvogel

Well-Known Member

• Feb 8, 2012

• #8

Would you be referring to the little braid cloth covered vacuum pipe like the one attached to the EGR to operate the valve inside?

There are lots of them all around the engine.

Singvogel.

 

C

cremator

New Member

• Feb 8, 2012

• #9

i think thats what he means but not sure

 

silkwood

New Member

• Feb 8, 2012

• #10

Sorry guys.

When the marten bit the tube I had no pressure when i put my foot on the brakes. So I think it is the tube for the brake/pressure/help/assist thing.

 

C

cremator

New Member

• Feb 8, 2012

• #11

ah think i no the one not sure if you can replace that in silcone

 

Singvogel

Well-Known Member

• Feb 8, 2012

• #12

OK then.

I think you are speaking about the 4mm vacuum pipe as it would take a bloody big marten to bite through the other bigger servo hoses!!!

Check here - it's dirt cheap and you buy it by the metre.

4mm vacuum pipe hose | eBay

Singvogel.

 

C

cremator

New Member

• Feb 8, 2012

• #13

just checked dph and they do it ring gareth a marten is nothig u want to see what a rat can do

 

silkwood

New Member

• Feb 8, 2012

• #14

Thanks guys.

I want to order them, but I didn't know, nor had the time to messure the diameter of it.

I fixed it a while back by putting cutting it shorter and put a connector between the two ends. It works fine now. But now I saw Gareth from DPH has an air intake hose I might as well order the rest to.

Cheers and thanks again.