I used a home made tool that streches the bulkhead between the flaps but it was too badly bent up to do a proper job it helped alot but still a gap either side so will live with it until I can fit it soon as the weather pics up a bit.
 
Take the **** I don't care as no1 was hurt. If I was imbarrased I wouldn't of shared it on the site.
 
sible88 said:
I used a home made tool that streches the bulkhead between the flaps but it was too badly bent up to do a proper job it helped alot but still a gap either side so will live with it until I can fit it soon as the weather pics up a bit.
Click to expand...

Dont know if I'd call a bent bulkhead 'fixed'......ffs just dont roll it again :eek:
 
There was a thread in the Gaylander section on how to wash the underside of a freeby...I think you could help.
 
I will try my hardest not to but never say never. The harnesses saved me alot, I don't normally wear a belt but with harnesses it comfortable so don't mind am glad I did thou.
 
True my dad has a gaylander and I take the **** all the time. He tries telling me to go on YouTube and look at them off road "they are good" WHAT A JOKE
 
Will take some pics 2moz in daylight so you can see bulkhead and stuff, also got a free roof rack with the truck cab. Didn't know they made one for the truck cab??
 
You must log in or register to reply here.

Similar threads

lightning
Value me this 110
Replies
17
Views
2K
Knappster
Knappster
R
Galv Bulkhead
Replies
3
Views
913
dag019
dag019
A
Hello from me & Lola the Landy
Replies
4
Views
687
Knappster
Knappster
L
Landy 110 1992 (J368 XSG) - is it as bad as mechanic says..
2 3
Replies
44
Views
5K
tottot
tottot
C
Diff lock stuck after clutch arm
Replies
4
Views
492
Scooby22
Scooby22