I used a home made tool that streches the bulkhead between the flaps but it was too badly bent up to do a proper job it helped alot but still a gap either side so will live with it until I can fit it soon as the weather pics up a bit.
 
Take the **** I don't care as no1 was hurt. If I was imbarrased I wouldn't of shared it on the site.
 
I used a home made tool that streches the bulkhead between the flaps but it was too badly bent up to do a proper job it helped alot but still a gap either side so will live with it until I can fit it soon as the weather pics up a bit.

Dont know if I'd call a bent bulkhead 'fixed'......ffs just dont roll it again :eek:
 
There was a thread in the Gaylander section on how to wash the underside of a freeby...I think you could help.
 
I will try my hardest not to but never say never. The harnesses saved me alot, I don't normally wear a belt but with harnesses it comfortable so don't mind am glad I did thou.
 
True my dad has a gaylander and I take the **** all the time. He tries telling me to go on YouTube and look at them off road "they are good" WHAT A JOKE
 
Will take some pics 2moz in daylight so you can see bulkhead and stuff, also got a free roof rack with the truck cab. Didn't know they made one for the truck cab??
 

Similar threads