D

Driebeen

New Member

• Jun 27, 2025

• #1

Freelander 1 TD4

 

marjon

Well-Known Member

Full Member

• Jun 27, 2025

• #2

Yeah .

J

 

marjon

Well-Known Member

Full Member

• Jun 27, 2025

• #3

Autotec Td4 and Td6 MAP Sensor - MHK101060L

Autotec Td4 and Td6 MAP Sensor - MHK101060L

maltings4x4store.co.uk

.

Why?

J

 

Arctic2

Well-Known Member

• Jun 27, 2025

• #4

Driebeen said:

View attachment 344005

Freelander 1 TD4

Click to expand...

MAP sensor f4

From the manifold they clogged up, all you have to do 9 times out of 10 is remove them and wipe them clean.

1

2

3

4

5

 

Last edited: Jun 27, 2025

D

Driebeen

New Member

• Jun 28, 2025

• #5

Thank you very much everyone found where it goes. I've had 2 L-Series Freelanders and know that motor inside out, first TD4 though.

 

L

landfr

Member

• Yesterday at 13:42

• #6

What should we pay attention to when removing the MAP sensor? Do we need to pull the wire shown in the picture upward? Most importantly, what should we use to clean it, and should we squeeze it into the hole?

 

Arctic2

Well-Known Member

• Today at 01:41

• #7

landfr said:

What should we pay attention to when removing the MAP sensor? Do we need to pull the wire shown in the picture upward? Most importantly, what should we use to clean it, and should we squeeze it into the hole?

Click to expand...

You press the spring clip to remove the plug from the MAP sensor, wipe it clean with a rag only sprayed with brake cleaner on the rag only, do not poke or spray anything into the hole of the MAP sensor.

They can be removed from the side of the manifold while it is in situ but it's a fiddly job, seeing that the MAP sensor would need cleaning the so would the manifold so it's best to remove that along with the EGR .