Datatek

Well-Known Member

• Today at 11:38

• #181

MontyChambers said:

here’s a thing.
This truck is on springs!
Could that trigger the ABS/TC dash lights?
It’s in the WABCO D section on my nanocom?

Click to expand...

No

 

MontyChambers

Member

• Today at 14:51

• #182

Nanocom EDC, WABCO
Pics of ABS sensors. Gently tapped in and seated with a copper mallet.
The connections have been cleaned and where they should be.

 

MontyChambers

Member

• Today at 15:02

• #183

I found another reading regarding brakes
Low high brakes at rest
High low pedal depressed
The WABCO D brake readings ars still close/close-open/open!

 

Last edited: Today at 15:09

pwood999

Well-Known Member

Full Member

• Today at 15:49

• #184

Your pictures show Open/Close and Close/Open - exactly as it should be.

Where are you seeing both closed at same time, or open at same time ? Take a video & upload it to YouTube. Then paste the link here.

 

kermit_rr

Very

Full Member

• Today at 16:48

• #185

MontyChambers said:

Nanocom EDC, WABCO
Pics of ABS sensors. Gently tapped in and seated with a copper mallet.
The connections have been cleaned and where they should be.View attachment 341708View attachment 341709View attachment 341709View attachment 341708

Click to expand...

I'm not sure what's going on there but something isn't right.
I can't remember but that doesn't look like the right location.
You shouldn't see the ABS ring and the sensor should be mm away not cm's

 

Datatek

Well-Known Member

• Today at 17:04

• #186

Sensors tapped in with a copper mallet? They should be a push fit, pushed in until they touch the reluctor ring. They will then self adjust the clearance when you drive the car. If the needed hammering in they may be damaged.

 

pwood999

Well-Known Member

Full Member

• Today at 17:09

• #187

Even the CV joint looks wrong ?? Usually the hub obscures that.

 

Datatek

Well-Known Member

• Today at 17:10

• #188

pwood999 said:

Even the CV joint looks wrong ?? Usually the hub obscures that.

Click to expand...

It does indeed and the sensor does not look like it's anywhere near the reluctor ring.