M

maxderby

Member

• Yesterday at 22:10

• #141

Hi all thanks once again, what's the procedure for bleeding the abs pump? All sensors are good and now down to just abs light on

 

Datatek

Well-Known Member

• Today at 08:02

• #142

maxderby said:

Hi all thanks once again, what's the procedure for bleeding the abs pump? All sensors are good and now down to just abs light on

Click to expand...

There is no specific procedure for bleeding the pump, you bleed the brakes per the instructions in RAVE. How do you know the sensors are good?

 

M

maxderby

Member

• Today at 09:54

• #143

hi
tested the sensors as informed in this thread, cant remember exact readings but they did pass to the figures given, suppose i could test them again, some how 4.9v or 4.9 ohms stick in my head, could be wrong

cheers
glyn

 

FEI

Active Member

• Today at 10:29

• #144

The pump bleeding is part of the whole brake system bleeding procedure. There are two bleed nipples on the side of the valve body, the one does the pump and the other does the master cylinder if i remember correctly.