ok..rangie classic eas system..
it wont drop into low when over 50mph,everything else is fine..why?????
now as far as i can see,it needs only to see that... handbrake is off(manual)
it is,and it knows as wont drop to access if handbrake off,will if on.
engine is running..it sees that as flashes switch lights in bulb test as soon as you start engine and will run compressor if needed..
inhibit switch and disable switch in "run" postion,they are..it will go to high if i ask it.
and importantly must see a speed signal from the speedo buffer relay.(on the yellow/pink wire)no becm here,rr classic..well it does,to prove i put in high, then drove off,at exactly 35mph it drops back to standard height,thus proving it seeing speed signsl...
so what the feck is stopping it dropping to low at over 50mph for 30 secs???
no faults being pulled by unlock suit software,software drops car to low if asked,heights are changed from standard landrover standard,but if it was outside limits then i gather it would just go to factory settings,which it dont...
help!!(thanks)
it wont drop into low when over 50mph,everything else is fine..why?????
now as far as i can see,it needs only to see that... handbrake is off(manual)
it is,and it knows as wont drop to access if handbrake off,will if on.
engine is running..it sees that as flashes switch lights in bulb test as soon as you start engine and will run compressor if needed..
inhibit switch and disable switch in "run" postion,they are..it will go to high if i ask it.
and importantly must see a speed signal from the speedo buffer relay.(on the yellow/pink wire)no becm here,rr classic..well it does,to prove i put in high, then drove off,at exactly 35mph it drops back to standard height,thus proving it seeing speed signsl...
so what the feck is stopping it dropping to low at over 50mph for 30 secs???
no faults being pulled by unlock suit software,software drops car to low if asked,heights are changed from standard landrover standard,but if it was outside limits then i gather it would just go to factory settings,which it dont...
help!!(thanks)