mr glee

Active Member

• Oct 2, 2016

• #1

Just fitted a new lift pump and couldn't get it to bleed with the lever but will if turned by the crank.have I done something wrong?

 

julianf

Well-Known Member

• Oct 2, 2016

• #2

Are you sure you are not just repeatedly stopping on the cam? I've needed to pulse the engine multiple times before to get it to stop in the right place.

 

mr glee

Active Member

• Oct 2, 2016

• #3

Thanks got it now just couldn't get the right spot.

 

doodle bug

Well-Known Member

• Oct 2, 2016

• #4

mr glee said:

Thanks got it now just couldn't get the right spot.

Click to expand...

Just what your mrs said !

 

Marmaduke

Well-Known Member

• Oct 2, 2016

• #5

Tdi engines are self priming so it'll start anyway just might need a bit of cranking on the starter

 

julianf

Well-Known Member

• Oct 2, 2016

• #6

I always screw the filter on loosely, and then pump till fuel drips, then tighten. Engine then starts no different from normal.

 

Disco1BFG

Well-Known Member

Full Member

• Oct 2, 2016

• #7

Marmaduke said:

Tdi engines are self priming so it'll start anyway just might need a bit of cranking on the starter

Click to expand...

Agreed - It always amazes me how tolerant the Bosch VE FIP is of air. (up to a point of course ) But, I am always pretty grateful too... cos ....:-

julianf said:

I always screw the filter on loosely, and then pump till fuel drips, then tighten. Engine then starts no different from normal.

Click to expand...

This works! in complete contrast to daughters Focus, which is a complete PITA

 

mr glee

Active Member

• Oct 2, 2016

• #8

Just ran some diesel purge through clear pipe to a jam jar and the return flow was full of tiny bubbles made the purge in the jar go misty is this normal?

 

julianf

Well-Known Member

• Oct 2, 2016

• #9

If you have been messing with the system, then possibly so.

If it runs fine, run it and either re-check in a week, or conclude that its running fine, and dont look for any more faults... : )

 

mr glee

Active Member

• Oct 2, 2016

• #10

It runs great now my I dare say "nippy" much quieter now as well.