nickh75

Well-Known Member

• Apr 5, 2008

• #1

just been looking on paddocks site and found jackable sills for my disco,
only thing is i dont know much about em
so here goes, do they replace the inner and outter sill or do they just bolt on abit like a side step, eg do ya weld em in or do ya fix em to the out rigger.
thanx in advance
an sorry if this is a daft post

 

Attachments

• 
  discovery_jackable_sills_small.jpg

  6.5 KB · Views: 139

nickh75

Well-Known Member

• Apr 5, 2008

• #2

well! take it you lot know jack all about sills then by the floods of reply's i got

 

nickh75

Well-Known Member

• Apr 6, 2008

• #3

ok! i'll take the hint an ask the shop

 

Pikey

Dummy Ejection Facilitator..

• Apr 6, 2008

• #4

hahaha. I think they bolt on.

 

nickh75

Well-Known Member

• Apr 6, 2008

• #5

redhand said:

hahaha. I think they bolt on.

Click to expand...

do thay replace the inner and outter sill?
coz mine are rusted and it would be better when i go greenlaneing
and thanx for the reply red

 

Pikey

Dummy Ejection Facilitator..

• Apr 6, 2008

• #6

No they're just strong side steps. If you want strong sills/sliders cut the old sills off and weld in a length of 40x100mm box section instant sills and sliders.

 

nickh75

Well-Known Member

• Apr 6, 2008

• #7

redhand said:

No they're just strong side steps. If you want strong sills/sliders cut the old sills off and weld in a length of 40x100mm box section instant sills and sliders.

Click to expand...

nice one
thanx red

 

S

shanelloyd

New Member

• Apr 9, 2008

• #8

My Rock Sliders Bolted Onto The Outriggers And I Did Not Have To Do Any Drilling At All. 1/2 Hr Job On Each Side Thats All.
Shane

 

BandM

New Member

• Apr 9, 2008

• #9

I dun know, sos can't answer

 

david451

New Member

• Apr 9, 2008

• #10

shanelloyd said:

My Rock Sliders Bolted Onto The Outriggers And I Did Not Have To Do Any Drilling At All. 1/2 Hr Job On Each Side Thats All.
Shane

Click to expand...

Are you able to post some pics, I have side steps and they are a menace, was going to make some.

 

Pikey

Dummy Ejection Facilitator..

• Apr 9, 2008

• #11

Their just a length of box section with a length of tube at one end and a pair of flat plates at the other end, with an hole drilled through em.