Opposite problem from many - got an earthing problem on the interior light which means it's always on when the switch is in the middle position. For a while it only flickered on when going over bumps but is now on permanently, so it looks like a loose connection catching on the bodywork somewhere.
Unfortunately the alarm triggers when the same circuit earths so I'm annoying the neighbours.
Before I start tearing things apart, any suggestions on where the most likely place is? I'm guessing the wires on the back of the door pillar switch or inside the light unit.
Unfortunately the alarm triggers when the same circuit earths so I'm annoying the neighbours.
Before I start tearing things apart, any suggestions on where the most likely place is? I'm guessing the wires on the back of the door pillar switch or inside the light unit.