Andy Land

Andy Land

Well-Known Member
Evening people ...

Quick question ... took a quick look under the bonnet of my fairly new (to me) 200Tdi 110 CSW today to see if I could see any obvious reasons why it seems to be a bit low on power. On checking all pipes and hoses I noticed that there was a small hole in the top of the metal intercooler pipe about six inches from the intercooler. Now I would have thought that this shouldn't be there but, the reason for me asking, is that the hole is about 4mm round and looks too neat ... almost like it was drilled by someone.

Can anyone shed any light on this please? My old 200tdi 90 certainly didn't have this hole ... I don't think :confused:
 
May have been used for a boost gauge or something in the past and the bung has come out
 
landowner said:
May have been used for a boost gauge or something in the past and the bung has come out
Click to expand...

Would that have been as small as 4mm though chap? ... I've put a blob of silicon in it to seal it for now but yet to see if it's made a difference :eek:
 
Andy Land said:
I've put a blob of silicon in there while I was sealing my new chequer plate ... do you think that will be ok or is it likely to get sucked in? :)
Click to expand...
It'll get blown out if anything, how about a hose clip round it, that should cover the hole:)
 
.15 of an inch :p no idea what that is in fractions

put a blob of tig weld on there if its stainless if not a screw and some high temp silicone
 
You must log in or register to reply here.

Similar threads

N
Drivers side large intercooler hose.
Replies
3
Views
586
Arctic2
Arctic2
P38Seb
P38A Intercooler Hose
Replies
13
Views
1K
Grrrrrr
Grrrrrr
R
Ex military 90 soft top 1994 - 300TDi conversion
Replies
7
Views
784
ChristopherDailey
C
Almonds
Help Request: 300TDI Overheating Mystery / Poss Bleed Hose?
Replies
2
Views
497
D1Nut
D1Nut
HDWO55
Freelander 2 (LR2) Whooshing noise when accelerating
Replies
7
Views
905
HDWO55
HDWO55