G

gee1599

New Member

• Jan 20, 2010

• #1

im trying to get the diaphram out of my fuel pump (bosch ve) it turns moves up and down but will not come out has any one come a cross this ?? i need to get it out as the diaphram has a hole in it

 

heggars

Nec flectitur nec mutant

• Jan 20, 2010

• #2

never seen one, but has the unit got a case that sits around it that has any screws or bolts you can see.

 

G

gee1599

New Member

• Jan 20, 2010

• #3

ive had one out of one before it just lifted out but mine is stuck some thing holding it in (poss the fuel pin ) i dont wont to leaver it out or anything like that

 

hughesy

Well-Known Member

• Jan 20, 2010

• #4

IIRC the pin that rests against the conical part of the spindle just needs pushing back into it's hole and bob's yer uncle.

 

C

colinl

New Member

• Jan 21, 2010

• #5

Hi, how do you push the pin back in its hole as i have got the same problem on my 94 300 tdi manual?

 

G

gee1599

New Member

• Jan 21, 2010

• #6

i was thinking the same thing ???? im going to try deadjusting the throttle and winding the inle speed screw out and then see if it comes out ??? i will let you know how i get on

 

G

gee1599

New Member

• Jan 24, 2010

• #7

sorted deadjusted the idle screw and cable twisted the diapham and out it came thanks for youe help people

 

C

Col T

New Member

• Feb 2, 2010

• #8

Hi,
I am not sure how this works or when I write this how to get information back but here goes.
Anyone,
I have a diesel leak on my injection 200tdi pump and have traced it to a bolt head on the cam case end and just above the three-bolt collar.
So I had another go at finding the source of the leak and traced it to the this bolt head I just need a little more guidance before I rip it all apart.

1. Is this some sort of tell, that when diesel leaks from it the pump is wrecked?
2. Or do I just take the pump off and tighten the bolt with a new washer?
3. What is the significance of the bolt?

Col T