hi guys ive recently purchased a 2012 sport.since buying i noticed the front and rear passenger doors wasn’t locking/unlocking then the problem got worse as now the electric windows don’t work on the passenger side and the electric mirror won’t fold in plus the indicator on the door won’t illuminate either.ive replaced both front and rear door locks but still having the same problem,I’ve checked all the fuses in the box and all good,I’ve changed passenger side door module too and the front passenger side door loom but still having the same problem of basically no power on both doors.does anybody have any idea of what this problem could be and how I can sort it out please??
Datatek
Well-Known Member
First, you are going to upset our politically correct member Gold Rover by saying "Hi Guys" she wishes an inclusive term to be used
Welcome.
If you bought the car from a dealer, take it back.
If you bought it privately, it needs to go on diagnostics, the electronics are a nightmare
anitarrc
Active Member
The electronics are what makes girls like me happy. Hence you shouldn't ask 'guys'
1st. Get yourself some decent diagnostics. I recommend Gaps Iidtool, get it soon. Or ask someone near you.
Then, post the result. With Gaps you can send the results by email to yourself
To me it sounds like the foo switch pack, LHs or in the UK Rh.
1st. Get yourself some decent diagnostics. I recommend Gaps Iidtool, get it soon. Or ask someone near you.
Then, post the result. With Gaps you can send the results by email to yourself
To me it sounds like the foo switch pack, LHs or in the UK Rh.
Hi again.firstly sorry about the guys thinggetting myself into trouble before I’ve even started ha ha.ive had a code reader on the car today and the codes it picked up was
U0200 lost communication with door control module B -permanent
U2101 control module configuration incompatible -permanent
Anyone have any ideas?
Thanks
U0200 lost communication with door control module B -permanent
U2101 control module configuration incompatible -permanent
Anyone have any ideas?
Thanks
Datatek
Well-Known Member
Find the location of the door control module and look to see if it's wet. Water ingress seems to be a common problem with Land Rover products.
Last edited:
anitarrc
Active Member
Go into inputs in your diagnostic, flick the switches and you'll see imeediately which side is the problem
Datatek
Well-Known Member
So much stuff is interlinked that the faults shown can be one or more steps away from the actual fault.
