First thing to do is check all the fuses (check RAVE for which ones) - this is I'm afraid extremely optimistic...
Somewhere on here is a hint to check the wiring - I think it's possible to get the back to work alone if only the seat has failed, as pointed out, search up
If the elements have gone (very likely) then there is an excellent guide on RangeRovers.net as to how to fix them. I've never done it as it looks a right pain for little gain
Somewhere on here is a hint to check the wiring - I think it's possible to get the back to work alone if only the seat has failed, as pointed out, search up
If the elements have gone (very likely) then there is an excellent guide on RangeRovers.net as to how to fix them. I've never done it as it looks a right pain for little gain
Ah my mistake, I read on here once that there were 2 30A fuses
No my mistake, there is one fuse that supplies relays in BECM for heated seats. Fuse 2, BECM fuses 30 AMP.
Last edited:
No my mistake, there is one fuse that supplies relays in BECM for heated seats. Fuse 2, BECM fuses 30 AMP.
and is located where ???
don´t know what becm is, i´m Swedish u know , so much technical English here
myfirstl322
Well-Known Member
Body Electronic Control Module... Under Passeger seat,
and is located where ???
don´t know what becm is, i´m Swedish u know , so much technical English here
Sorry bort panelen från sidan av passagerarsätet. Säkringar i det.
myfirstl322
Well-Known Member
Whats swedish for 'showoff'
:clap2:
myfirstl322
Well-Known Member
Showoff.
:high5:
