Please can you post some pictures of what you have done to 'fix' your problem c13tay. My clutch was giving me grief again today.

Darmain

Ill try to get some pics - when Im home in daylight !!!

Basically below is a list of what I did - not sure which bit helped - but seems to be ok for now .

Removed air filter box etc to get a better view.

Removed C clip

pulled slave out of way.

Manually moved arm that comes from bell housing as fas as I could in both directions.

re-fitted slave and adjusted C clip so that open part was facing front of car.

All is well !!!

Ill try to get some pics showing the route of the line

Chris

You've probably seen my thread on the clutch but just in case take a look. It might help you, it might not.

Good luck,

Dave

http://www.landyzone.co.uk/lz/f9/clutch-bite-point-problem-78630.html