95 V8 auto 186k
Hi folks, I am thinking of making a thingy for changing the front suspension bushes.
Does anyone have the sizes for such a thing?
I have the Laser unit for the rears. It was advertised for the fronts too but doesnt.
ta much
The first time I replaced mine I put them in hot water then squeezed them with jubilee çlips then pressed them in. The second time I used poly bushes Dead easy as they come in two pieces.only used them at the axle end and I never noticed any ride difference.
Made an insertion tool from 1 inch Micarta. Internal bore tapers from 62 mm to 59 mm over the 1 inch depth. Then suitable press blocks to press bush through tool and into eye with 20 ton press. Easy job.