Hicap phill
Well-Known Member
That T piece needs fixing to stop vibration.you are unable to clip any of this pipe to the chassis in your set up.
Rotate the T so main input goes to MC, 1 branch goes to NS wheel & then make a short pipe onto the other Output.
Also this means if you want to remove the flexi you don’t have to remove the whole T piece
Rotate the T so main input goes to MC, 1 branch goes to NS wheel & then make a short pipe onto the other Output.
Also this means if you want to remove the flexi you don’t have to remove the whole T piece
Hicap phill
Well-Known Member
Can’t remember if the T piece has the correct internal face to seal correctly to the flexi?
just wondering why you want to pipe it up like this?
Shippers
Well-Known Member
Agree dont think the flex does have at that end the correct face as it is shaped to fit a female union that has a flared end brake pipe in it and the t-union has a face for a male with flared pipe...
