Ditto12 · Nov 2, 2013

Hi just Eden told that I will have to use spacers so that I can fit pre 2000 wheels on to my td4 2003 is this the case and if so what thickness will I need any help appreciated

bukko · Nov 2, 2013

This comes up all the time.
5mm spacers are enough apparently.
I'd get bigger though. If you're going to add some, add proper ones

Ditto12 · Nov 2, 2013

Ok thanks will look at 7-10mm ones
Much appreciated

longdog · Nov 2, 2013

Buy a set of correct wheels, cheaper than proper, safe, spacers.
Spacers need to have a spigot on them to mount the wheel on, it's a near two ton car, not a chav Corsa.

Ditto12 · Nov 3, 2013

I have 2 general grabber at2 old pattern. Can't get them any more but I've been offered a very similar tread pattern tyre. Just for winter use, am I right in thinking that as long as the size,pattern are very similar I can use them on a td4

Thanks

The Mad Hat Man · Nov 3, 2013

check the actual sizes (measure the circumference). do not rely in whats written on the tyre. But best to fit all 4 the same (and new only on back)

bukko · Nov 3, 2013

It's all about the rolling circumference.
If they are about the same (+/- 10mm I think) they should be ok.
As always, if there's a difference put the larger circumference tyres on the rear.

Duncp73 · Nov 3, 2013

You shouldn't mix makes, although it says the same size it may not be. You really need to check the circumference. Somebody did post up the tolerances recently. Personally I'd get 4 new tyres if you can.

Dunc

Duncp73 · Nov 3, 2013

bukko said:
It's all about the rolling circumference.
If they are about the same (+/- 10mm I think) they should be ok.
As always, if there's a difference put the larger circumference tyres on the rear.

10mm is way to much of a difference mate. I think it's about 5mm.

bukko · Nov 3, 2013

Duncp73 said:
10mm is way to much of a difference mate. I think it's about 5mm.

I thought it was about 5mm diameter, so I usually say 10mm circumference (which is less!) to be safe

Duncp73 · Nov 3, 2013

bukko said:
I thought it was about 5mm diameter, so I usually say 10mm circumference (which is less!) to be safe

Sorry mate. Mis read your post.

Ditto12 · Nov 3, 2013

Thanks
Although the tyre size is the same 215/65/16 what if the tread pattern is slightly different?

The Mad Hat Man · Nov 3, 2013

Ditto12 said:
Thanks
Although the tyre size is the same 215/65/16 what if the tread pattern is slightly different?

that does NOT mean they are the same size !

Ditto12 · Nov 3, 2013

I understand but will the difference in pattern do any trans damage

Epicuser · Nov 3, 2013

Ditto12 said:
I understand but will the difference in pattern do any trans damage

If they are on the same "axle" then yes.

Keep the same type of tyre and trad pattern on the same "axle".

Ps I know we don't have axles :lol:

Spacemonkey... · Nov 5, 2013

And STILL measure the circumference and put the bigger ones on the rear.

Ditto12 · Nov 6, 2013

Thanks for all the info

Ditto12 · Nov 25, 2013

Just checked the circumference there is a 10 mm difference if I put these on the back will I get away with it?

bukko · Nov 25, 2013

Ditto12 said:
Just checked the circumference there is a 10 mm difference if I put these on the back will I get away with it?

It isn't recommended at all, but if you put the bigger ones on the rear you might get away with it for a while.
As in all things, there is always the old lady who smoked 120 a day and lived till 100, but just be aware of potential damage and check your VCU regularly.

Kizzeh · Nov 25, 2013

May be a stupid question but is that measurement the tyre on its rim and inflated or just loose?
might make all the difference

New Member

Well-Known Member

New Member

Active Member

New Member

Well-Known Member

Well-Known Member

New Member

New Member

Well-Known Member

New Member

New Member

Well-Known Member

New Member

Ex Freelander Owner

Well-Known Member

New Member

New Member

Well-Known Member

Well-Known Member

Similar threads