mozz smith · Dec 22, 2011

:welcome2:hi all, just what i dont need at this time of year

. i have a 2000 model v8 vogue p38 as original . i have had a few problems with the fob last few days . i only have one fob for the car , lights on fob not working and not opening the car , changed batteries and no difference . phoned landrover they say cant order new one till 4 jan and will take 10 days to deliver from germany , so does anyone know how to switch alarm off so i can just use existing key to get around for xmas , ???

or if i get a secondhand fob can it be stripped down and insert all my gubbins into it ?? or is it a sealed unit ???

i ask that because i remember dropping the fob last week and maybe that fkd it up :doh:,,any ideas would be greatly appreciated to keep me mobile till jan when i can get a replacement please help am now desperate as only have the rangie to use ,,my car battery is new and a heavy duty one and theres no problems there ..in anticipation cheers ,,mozz

dougdotcom · Dec 22, 2011

I read somewhere you have to replace the battery in the fob within 1 min, and sometimes the rubber button cover can loose its pressure pad movement and needs replacing. If you take the rubber cover off the switches and press the buttons with a screwdriver this will show if its working.

If you do get the led to blink again then you may have to resync the key fob into the system again. this is well documented on here

Is your alarm going off? how are you unlocking the RR to make the alarm sound?

mozz smith · Dec 22, 2011

hi doug i use the key to open door and alarm goes off the turs itself off after a few minutes and then resets itself . cheers mozz

dougdotcom · Dec 22, 2011

mozz smith said:
hi doug i use the key to open door and alarm goes off the turs itself off after a few minutes and then resets itself . cheers mozz

I see, If you take a run down to Nottingham Ill turn your alarm off for free then if you need later when you receve your new fob ill activate it again for you.

Saint.V8 · Dec 23, 2011

The key is sealed....you will have to get physical with it to get your bits and bobs out (oh er misses..!!)

j the range · Dec 23, 2011

try putting your eka code in..

mozz smith · Dec 23, 2011

cheers doug have now sorted it the buttons on/off on fob r fkdd but works intermittenly so will persevere till new year and get a new one ..many thanks ,mozz

Datatek · Dec 23, 2011

mozz smith said:
cheers doug have now sorted it the buttons on/off on fob r fkdd but works intermittenly so will persevere till new year and get a new one ..many thanks ,mozz

Just fit a new button pad, about £6 or less on Ebay. If you order a new key, make sure it's not the same key number as the one you have got, i.e. if you key is numbered #1 get a #2 or vice versa or to be sure order a #3

mozz smith · Dec 23, 2011

cheers keith will do ,,have a good xmas and new year , mozz

Datatek · Dec 23, 2011

mozz smith said:
cheers keith will do ,,have a good xmas and new year , mozz

You too Moz

mozz smith

Well-Known Member

dougdotcom

Active Member

mozz smith

Well-Known Member

dougdotcom

Active Member

Saint.V8

Dyed-in-the-wool 100% RR Junkie

j the range

New Member

mozz smith

Well-Known Member

Datatek

Well-Known Member

mozz smith

Well-Known Member

Datatek

Well-Known Member

Similar threads